Busbar Insulators And Supports

• Application
• Electrical panels, switchboards, and control gear assemblies

• Breakdown Voltage
• >10 kV

• Coating Type
• None (integral molded body)

• Color
• Red

• Density
• 2.1 Gram per cubic centimeter(g/cm3)

• Feature
• High mechanical and dielectric strength, moisture resistant

• Heat Conductivity
• Low

• Installation Guideline
• Mount vertically or horizontally with suitable fastener

• Layer
• Single molded

• Material
• DMC (Dough Moulding Compound) / Epoxy Resin

• Max Withstanding Temperature
• 130C - 180C

• Product Type
• Conical Type Standoff Insulator

• Rated Voltage
• Up to 1100 V

• Size
• Height 20-50 mm (varies by model)

• Surface Treatment
• Smooth molded finish

• Tensile Strength
• > 60 MPa

• Thermal Conductivity
• 0.3 W/mK

• Thickness
• 5-15 mm (typical)

• Width
• Varies by model, typically 25-60 mm

• Application
• Electrical panels, switchgears, busbar supports

• Breakdown Voltage
• >18 kV/mm

• Coating Type
• Moulded, self-colored

• Color
• Red

• Density
• 1.9 Gram per cubic centimeter(g/cm3)

• Feature
• High mechanical strength, flame retardant, moisture resistant

• Heat Conductivity
• Low thermal conductivity

• Installation Guideline
• Mount using threaded metal inserts, ensure clean and dry surfaces

• Layer
• Single-piece molded

• Material
• DMC (Dough Moulded Compound) / Epoxy Resin

• Max Withstanding Temperature
• 130C

• Product Type
• Cylindrical Type Standoff Insulator

• Rated Voltage
• 1000V to 12000V

• Size
• Available in multiple sizes (overall length typically 30mm - 100mm)

• Surface Treatment
• Smooth finish, insulation coated

• Tensile Strength
• 80 MPa

• Thermal Conductivity
• <0.3 W/mK

• Thickness
• As per design/specification

• Width
• As per requirement (typically 20mm - 50mm)

• Application
• Electrical insulation, PCB mounting, panel separation, control panels

• Breakdown Voltage
• >18 kV/mm

• Coating Type
• None (integral molding)

• Color
• Red

• Density
• 2 Gram per cubic centimeter(g/cm3)

• Feature
• High dielectric strength; flame retardant; corrosion resistant

• Heat Conductivity
• Low (poor heat conductor)

• Installation Guideline
• Requires threaded mounting, suitable for stud mounting

• Layer
• Single layer solid insulator

• Material
• DMC (Dough Moulding Compound)

• Max Withstanding Temperature
• Up to 150C

• Product Type
• Spacer Standoff Insulator

• Rated Voltage
• Up to 1000V (Typical)

• Size
• Hexagonal, varied lengths (e.g., M4 x 25mm, M6 x 20mm, etc.)

• Surface Treatment
• Smooth molded finish

• Tensile Strength
• 80-110 MPa

• Thermal Conductivity
• 0.25 W/m.K

• Thickness
• As per model specification

• Width
• Varies by model (commonly 10mm, 12mm, etc.)

• Application
• Panel Boards, Switchgears, Distribution Boards, Bus Bar Supports

• Breakdown Voltage
• >10 kV

• Color
• Red

• Density
• 2.0 Gram per cubic centimeter(g/cm3)

• Feature
• Flame Retardant, Non-Hygroscopic, High Mechanical Strength

• Heat Conductivity
• Low Thermal Conductivity

• Installation Guideline
• Mount with Brass Insert/Threaded Studs

• Layer
• Single Layer

• Material
• DMC (Dough Moulding Compound) / Epoxy Resin

• Max Withstanding Temperature
• 130C - 150C

• Product Type
• Drum Type Standoff Insulator

• Rated Voltage
• up to 1100V AC

• Size
• Standard sizes 25, 40, 50, 75 mm or as required

• Surface Treatment
• Smooth Molded Finish

• Tensile Strength
• 90 MPa (approx.)

• Thermal Conductivity
• 0.2-0.3 W/mK

• Thickness
• Varies (typically 15-30mm)

• Width
• Varies (typically 25-75mm)

• Application
• Electrical Panel Boards, Busbar Support, Switchgear, Distribution Boards

• Breakdown Voltage
• >18 kV/mm

• Coating Type
• None, self-colored material

• Color
• Red

• Density
• 2.0 Gram per cubic centimeter(g/cm3)

• Feature
• High mechanical and electrical strength, flame retardant, moisture resistance

• Heat Conductivity
• Low

• Installation Guideline
• Install using threaded hardware, ensure tight fit and no surface cracks

• Layer
• Single layer, homogeneous

• Material
• DMC (Dough Moulding Compound) / Epoxy Resin

• Max Withstanding Temperature
• 130C to 155C

• Product Type
• Full Hex Type Standoff Insulator

• Rated Voltage
• Up to 1000V or as specified

• Size
• Various (M4, M6 thread size, multiple heights)

• Surface Treatment
• Smooth moulded finish

• Tensile Strength
• 80 MPa

• Thermal Conductivity
• <0.3 W/mK

• Thickness
• Standard as per size (e.g., 10mm, 12mm, etc.)

• Width
• As per size specification (e.g., 17mm, 19mm, 25mm, etc.)

• Application
• Electrical panel boards, switchgears, busbar supports

• Breakdown Voltage
• >10 kV/mm

• Coating Type
• Uncoated (solid molded body)

• Color
• Red

• Density
• 2.0 Gram per cubic centimeter(g/cm3)

• Feature
• Flame retardant, high mechanical strength, high dielectric strength

• Heat Conductivity
• Low (insulating properties)

• Installation Guideline
• Mount with matching threaded fasteners; ensure correct torque

• Layer
• Single layer solid insulator

• Material
• DMC (Dough Moulding Compound) / Epoxy Resin

• Max Withstanding Temperature
• 120C - 150C

• Product Type
• Hexagonal Type Standoff Insulator

• Rated Voltage
• Up to 1000V AC / 1500V DC

• Size
• Various (Typically M4, M6, M8, M10 thread sizes and 16-50mm length)

• Surface Treatment
• Smooth Molded Finish

• Tensile Strength
• >80 MPa

• Thermal Conductivity
• <0.3 W/mK

• Width
• 16 mm - 50 mm (depends on model)

• Application
• Electrical distribution panels, busbar supports

• Breakdown Voltage
• 15 kV/mm

• Coating Type
• No additional coating (natural ceramic)

• Color
• Off-white / Cream

• Density
• 2.5 Gram per cubic centimeter(g/cm3)

• Feature
• Multi-slot design for various bar sizes, high insulative property

• Heat Conductivity
• Low (ceramic insulators have excellent thermal insulation)

• Installation Guideline
• Mount directly to panel using pre-formed holes

• Layer
• Single layer construction

• Material
• Ceramic

• Max Withstanding Temperature
• Up to 1000C

• Product Type
• Insulator for Vertical Bars

• Rated Voltage
• Up to 1000V

• Size
• Multiple sizes available upon request

• Surface Treatment
• Unglazed / Natural Finish

• Tensile Strength
• Typical for ceramics: 120-150 MPa

• Thermal Conductivity
• ~2.5 W/mK

• Thickness
• 10-25 mm

• Width
• 30-70 mm (varies by model)

• Application
• Bus Bar Support, Power Distribution Panels, Electrical Switchboards

• Breakdown Voltage
• >20 kV

• Coating Type
• Glazed/Non-Glazed

• Color
• Ivory/White

• Density
• 2.6 Gram per cubic centimeter(g/cm3)

• Feature
• High Insulation, Flame Retardant, Durable

• Heat Conductivity
• Low, Designed for Electrical Insulation

• Installation Guideline
• Mount vertically under bus bars using mechanical fasteners

• Layer
• Single solid piece

• Material
• High Grade Porcelain / Epoxy Resin

• Max Withstanding Temperature
• Up to 120C (Porcelain); up to 180C (Epoxy Resin)

• Product Type
• L Supports Insulator for Vertical Bars

• Rated Voltage
• Up to 11 kV

• Size
• Standard or customized, e.g., 100x80x30 mm

• Surface Treatment
• Smooth/Glazed Finish

• Tensile Strength
• 120-150 MPa

• Thermal Conductivity
• 1.5 W/mK

• Thickness
• Custom as required (usually 20-60 mm)

• Width
• As per design (typically 30-100 mm)

• Application
• PCB mounting, circuit isolation, electrical panel assembly

• Breakdown Voltage
• >20 kV/mm

• Coating Type
• None, as-molded plastic

• Color
• White / Off-white

• Density
• 1.2 Gram per cubic centimeter(g/cm3)

• Feature
• Lightweight, corrosion resistant, non-magnetic

• Heat Conductivity
• Low, ~0.25 W/mK

• Installation Guideline
• Manual screw tightening recommended; do not overtighten

• Layer
• Single Layer

• Material
• Plastic (Nylon/Polycarbonate)

• Max Withstanding Temperature
• 120C

• Product Type
• Spacer Standoff Insulator

• Rated Voltage
• 500V - 1000V (Typical)

• Size
• M3-M6 thread, Length 10mm-50mm (typical range)

• Surface Treatment
• Smooth molded finish

• Tensile Strength
• 60 MPa (Nylon)

• Thermal Conductivity
• Low; Insulating

• Thickness
• Varies by specification, usually 2mm to 5mm

• Width
• Depends on model, typically 5mm to 15mm

• Application
• Panel Boards, Switchgears, Control Panels, Power Distribution Units

• Breakdown Voltage
• >16 kV

• Coating Type
• Uncoated

• Color
• Black, Ivory/White

• Density
• 1.15 Gram per cubic centimeter(g/cm3)

• Feature
• High mechanical strength, flame retardant, weatherproof

• Heat Conductivity
• Low, typically <0.3 W/mK

• Installation Guideline
• Install between electrical terminals to provide isolation and physical support.

• Layer
• Single layer polyamide structure

• Material
• Polyamide (PA6 or PA66)

• Max Withstanding Temperature
• 120C

• Product Type
• Standoff Insulator

• Rated Voltage
• Up to 1000V AC/DC

• Size
• From M4 to M12 thread, height 19mm to 60mm

• Surface Treatment
• Molded Finish

• Tensile Strength
• 60 MPa approx.

• Thermal Conductivity
• ~0.24 W/mK

• Thickness
• Not applicable (cylindrical shape)

• Width
• 16mm to 50mm (varies by model)

• Application
• Electrical Panel Board, Control Panels, Busbar Support

• Breakdown Voltage
• >= 12 kV

• Coating Type
• No additional coating; integral colored polymer

• Color
• Red

• Density
• 1.3 Gram per cubic centimeter(g/cm3)

• Feature
• High Insulation, Flame Retardant, Anti-Tracking

• Heat Conductivity
• Low (typical for thermoplastics)

• Installation Guideline
• Mount using threaded studs or bolts

• Layer
• Single (solid body)

• Material
• Polyamide (PA), Brass Insert

• Max Withstanding Temperature
• 130C

• Product Type
• Round Hex Type Standoff Insulator

• Rated Voltage
• Up to 1 kV (1000 V)

• Size
• M6, M8, M10 threads (varies)

• Surface Treatment
• Smooth Molded Finish

• Tensile Strength
• >70 MPa

• Thermal Conductivity
• ~0.26 W/mK

• Thickness
• Body thickness ~15 mm (varies by model)

• Width
• Hex dimension depends on model size, typically 16 mm to 25 mm

• Application
• Mounting or supporting vertical bars/rods in frameworks, railings, or enclosures

• Breakdown Voltage
• Non-conductive, not rated for electrical insulation use

• Coating Type
• No additional coating; molded plastic body

• Color
• Beige / Light Cream

• Density
• 1.2 Gram per cubic centimeter(g/cm3)

• Feature
• Corrosion resistant, lightweight, easy installation, non-conductive

• Heat Conductivity
• Low (typical for plastic components)

• Installation Guideline
• Install with screws through preformed holes onto mounting surface, align grooves for vertical bars

• Layer
• Single-piece, monolithic body

• Material
• High-strength Plastic / Polymer (exact type not specified)

• Max Withstanding Temperature
• Up to 80C (typical for engineered plastics)

• Product Type
• Support For Vertical Bars

• Size
• Standard and custom sizes available, approx. L 90 mm x W 40 mm x H 20 mm

• Surface Treatment
• Smooth molded finish

• Tensile Strength
• High (specific value depends on material grade, but generally >50 MPa)

• Thermal Conductivity
• Very low (0.2-0.3 W/mK, typical for plastics)

• Thickness
• Varies; typically ~10-15 mm

• Width
• As per drawing (custom options available, typically ~40-50 mm)